Sign In | Join Free | My himfr.com
Home > Power Management ICs >

LM2700MTX-ADJ NOPB Switching Voltage Regulators PMIC Power Management ICs TSSOP-14 Package

Walton Electronics Co., Ltd.
Contact Now
    Buy cheap LM2700MTX-ADJ NOPB Switching Voltage Regulators PMIC Power Management ICs TSSOP-14 Package from wholesalers
     
    Buy cheap LM2700MTX-ADJ NOPB Switching Voltage Regulators PMIC Power Management ICs TSSOP-14 Package from wholesalers
    • Buy cheap LM2700MTX-ADJ NOPB Switching Voltage Regulators PMIC Power Management ICs TSSOP-14 Package from wholesalers
    • Buy cheap LM2700MTX-ADJ NOPB Switching Voltage Regulators PMIC Power Management ICs TSSOP-14 Package from wholesalers
    • Buy cheap LM2700MTX-ADJ NOPB Switching Voltage Regulators PMIC Power Management ICs TSSOP-14 Package from wholesalers

    LM2700MTX-ADJ NOPB Switching Voltage Regulators PMIC Power Management ICs TSSOP-14 Package

    Ask Lasest Price
    Brand Name : Original
    Model Number : LM2700MTX-ADJ/NOPB
    Certification : ISO9001:2015standard
    Price : Contact us to win best offer
    Payment Terms : L/C, T/T, Western Union, PayPal
    Supply Ability : 10000pcs/months
    Delivery Time : 1-3week days
    • Product Details
    • Company Profile

    LM2700MTX-ADJ NOPB Switching Voltage Regulators PMIC Power Management ICs TSSOP-14 Package


    LM2700MTX-ADJ/NOPB Switching Voltage Regulators PMIC Power Management ICs SN75LVCP601RTJR W25Q128JVFIQ Power Management


    Detailed Description
    The LM2700 utilizes a PWM control scheme to regulate the output voltage over all load conditions. The operation
    can best be understood referring to the block diagram and Figure 17 of the Operation section. At the start of
    each cycle, the oscillator sets the driver logic and turns on the NMOS power device conducting current through
    the inductor, cycle 1 of Figure 17(a). During this cycle, the voltage at the VC pin controls the peak inductor
    current. The VC voltage will increase with larger loads and decrease with smaller. This voltage is compared with
    the summation of the SW voltage and the ramp compensation. The ramp compensation is used in PWM
    architectures to eliminate the sub-harmonic oscillations that occur during duty cycles greater than 50%. Once the
    summation of the ramp compensation and switch voltage equals the VC voltage, the PWM comparator resets the
    driver logic turning off the NMOS power device. The inductor current then flows through the schottky diode to the
    load and output capacitor, cycle 2 of Figure 17(b). The NMOS power device is then set by the oscillator at the
    end of the period and current flows through the inductor once again.
    The LM2700 has dedicated protection circuitry running during normal operation to protect the IC. The Thermal
    Shutdown circuitry turns off the NMOS power device when the die temperature reaches excessive levels. The
    UVP comparator protects the NMOS power device during supply power startup and shutdown to prevent
    operation at voltages less than the minimum input voltage. The OVP comparator is used to prevent the output
    voltage from rising at no loads allowing full PWM operation over all load conditions. The LM2700 also features a
    shutdown mode decreasing the supply current to 5μA.



    Switching Voltage Regulators
    SMD/SMT
    TSSOP-14
    Boost
    1.26 V to 17.5 V
    3.6 A
    1 Output
    2.2 V
    12 V
    600 kHz to 1.25 MHz
    - 40 C
    + 125 C
    LM2700
    Reel
    Cut Tape
    Development Kit:LM2700MT-ADJEV
    Input Voltage:2.2 V to 12 V
    Product Type:Switching Voltage Regulators
    Shutdown:Shutdown
    2500
    Subcategory:PMIC - Power Management ICs
    Supply Voltage - Min:2.2 V
    Type:Step Up
    Unit Weight:0.004949 oz
    Quality LM2700MTX-ADJ NOPB Switching Voltage Regulators PMIC Power Management ICs TSSOP-14 Package for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Walton Electronics Co., Ltd.
    *Subject:
    *Message:
    Characters Remaining: (0/3000)